Tuesday, November 6, 2012
2001 Subaru Impreza 2.5 RS Coupe AWD F4-2.5L SOHC Timing Belt Service and Repair
A: Timing Belt Service and Repair Removal
1. 2001 Subaru Impreza Timing Belt
1. Remove timing belt guide. (MT vehicles only)
2. If alignment mark (a) and/or arrow mark (which indicates rotation direction) on timing belt fade away, put new marks before removing timing belt as shown in procedures below.
1. Turn crankshaft using ST. Align mark (a) of sprocket to cylinder block notch (b) and ensure that right side cam sprocket mark (c), cam cap and cylinder head matching surface (d) and/or left side cam sprocket mark (e) and belt cover notch (f) are properly adjusted. ST 499987500 CRANKSHAFT SOCKET.
B: Timing Belt Service and Repair Installation
1. Automatic belt tension adjuster assembly and belt idler for 2001 Subaru Impreza 2.5 RS Coupe.
1. Preparation for installation of automatic belt tension adjuster assembly; CAUTION:
- Always use a vertical type pressing tool to move the adjuster rod down.
- Do not use a lateral type vise.
- Push adjuster rod vertically.
- Be sure to slowly move the adjuster rod down applying a pressure of 294 N (30 kgf, 66 lbs.) .
- Press-in the push adjuster rod gradually take more than three minutes.
- Do not allow press pressure to exceed 9,807 N (1,000 kgf, 2,205 lbs.) .
- Press the adjuster rod as far as the end surface-face of the cylinder. Do not press the adjuster rod into the cylinder. Doing so may damage the cylinder.
- Do not release press pressure until stopper pin is completely inserted.
get here 2001 Subaru Impreza 2.5 RS Coupe AWD F4-2.5L SOHC Timing Belt Service and Repair
