Tuesday, November 6, 2012
1997 Subaru Legacy GT Sedan Timing Belt Service and Repair Installation
1997 Subaru Legacy GT Sedan AWD F4-2.5L DOHC Vehicle Level Engine, Cooling and Exhaust Engine Timing Belt Service and Repair Installation.
Timing belt installation :
1) Install right-hand belt cover No.2.
2) Install left-hand belt cover No.2.
3) Install tensioner bracket
4) Install crankshaft sprocket.
5) Install right-hand exhaust camshaft sprocket. To lock camshaft, use ST.
6) Install right-hand intake camshaft sprocket using ST.
7) Install left-hand exhaust camshaft sprocket using ST.
Install left-hand intake camshaft sprocket using ST.
ST 499207300 CAMSHAFT SPROCKET WRENCH
TIMING BELT
1) Crankshaft and camshaft sprocket alignment.
(1) Align mark on crankshaft sprocket with mark on the oil pump cover at cylinder block.
(2) Align single line mark on right-hand exhaust camshaft sprocket with notch on belt cover.
(3) Align single line mark on right-hand exhaust camshaft sprocket with notch on belt cover. (Make sure double lines on intake camshaft and exhaust camshaft sprockets are aligned.)
(4) Align single line mark on left-hand exhaust camshaft sprocket with notch on belt cover by turning sprocket counter-clockwise (as viewed from front of engine).
(5) Align single tine mark on left-hand intake camshaft sprocket with notch on belt cover by turning sprocket clockwise (as viewed from front of engine). Ensure double tines on intake and exhaust camshaft sprockets are aligned.
