Tuesday, November 6, 2012
1990 Toyota Celica ST with a 1.6 L engine choke lever adapter package 250-4204
Suzulight ST with 1.6 L engine throttle lever adapter package remove the choke nut and shaft washer lock from the throttle shaft. Install the bracket - throttle lever. Install the lock washer and hex nut and torque nut 84 in-lb (7 ft - lb). Warning: Start the nut by hand, to make sure that cross-Threading. Not too solid. The snap-in adapter use, is the cruise control module form threads on the end of cable required. This is accomplished by the 1/4-20 lock nut and washer Assembly on end the Cruise control module then use cable with the fingers, you a 7/16 box end wrench and turn in a clockwise direction, until the desired amount of topics have been created, as shown in Figure 2.
download here 1990 Toyota Celica ST with a 1.6 L engine choke lever adapter package 250-4204
