Tuesday, November 6, 2012
Toyota car parts - manual for Toyota 250-3642 automobile parts
1994 TOYOTA THROTTLE 250-3642 automobile parts:
1. Remove the throttle the throttle lever bracket. Start the nut by hand, to make sure that cross-Threading.
2. Install the snap-in adapter from the cruise control Kit on the cruise control cable. Note: At least through the end of the snap-in adapter.
3. Install the cruise control cable holder on the vehicle accelerator Accelerator solve cable nut and insert between nut and vehicle accelerator cable holder rear only. Tor cable Groove.
4. Install cruise control into the square hole of the cable holder. TRUCK with lever adapter 250-3642 nut and lock shaft washer lock nut from the throttle reinstall washer and hex. 1/8 from the cruise control must cable his figure Groove & Lockwashel exposed ass 1/4-20 module cable must extend past ADA? Press door cable cable holder
4 CYL. MODULE package shaft. Note: You do not pull over down. 1 Adapter-throttle ~ thread
Snap-in-cable holder cable grips follow the article-the snap-in adapter...
Connect chain and the eyelet connector from the cruise Kit cruise control cable to the throttle lever with beads. Secure the loop connector on the throttle lever with the two washers and self locking pin in the throttle body adapter Kit provided
Download Toyota car parts - manual for Toyota 250-3642 automobile parts
