Friday, February 3, 2012
Becker 4602 Owner’s Manual
The radio is theft-protected. If it is disconnected from the vehicle power supply or the power supply to the radio has been otherwise interrupted, “CODE” will appear on the display the next time it is switched on. After pressing the button, the prompt “CODE” is displayed, followed by 4 stars. The four-digit code must then be entered using the multi-function buttons “1-0”.
Example : Code number 1530 (the code number can be found on the enclosed CODE CARD).Enter the code number using the multi-function buttons. The first star is erased after entering the first digit. The second star is erased after entering the second digit, and so on. The radio automatically switches itself on if the code is correct after entering the fourth digit.
Note:
Never leave the CODE CARD in the vehicle. Keep it in a safe place outside of the vehicle.The accompanying anti-theft sticker should be attached to the inside of the side window.
If an incorrect code is entered, the prompt “CODE” and the four stars are displayed again. If an incorrect code is entered three times in succession, the prompt “WAIT” is displayed and the radio is locked out for approximately 60 minutes. After three more subsequent incorrect entries, the radio is again locked out for approximately 60 minutes.
