Saturday, February 4, 2012
Mitsubishi L300 Engine inspection procedure
POWER STEERING oil pump drive BELT tension check box and adaptation: With your finger tip lightly tap the center of the belt between pulleys in the location shown by the arrow in the illustration and then measure the belt vibration frequency. Apply 98N pressure against the location between pulleys shown by the arrow in the illustration and then measuring the deflection.
AIR CONDITIONER MANUFACTURING ARE COMPRESSOR DRIVE BELT TENSION CONTROL AND ADJUSTMENT. (1) Loosen tension friction disc is guaranteed the fixing nut. (2) adjust the belt tension with adjusting bolt. (3) tighten the fastening parts nut. (4) Check belt deflection amounts and tensions, and adjust if necessary. Caution check box after turning the crankshaft once or more clockwise. Check that the ignition timing is at the default value. The default value. Enter the vehicle before the inspection, subject to the condition before the inspection. Replace the three way catalyst, where CO content is not within the normal value, even if the result of the inspection is normal on all elements. Attach a three-way union for the vacuum hose between the pressure regulator fuel and air intake plenum and connect a vacuum gauge.
