Monday, February 6, 2012
Barrel adapter instructions Opal display driver
Precautions installation select the location of the Assembly, the following observation – the unit is not subject to the system at temperatures exceeding 55 c (as in a car parked in direct sunlight)-the unit is not subject to direct sunlight. -The unit is not near heat sources (such as away). -The unit is not exposed to rain or moisture. -The unit is not exposed to excessive dust or dirt. – The unit will not be subject to excessive vibration. Warranty – this product is covered by warranty of 12 months from the date of purchase – valid lead adapter and will be replaced at no charge if it fails due to a defect in manufacturing. -You need a custom adapter or was per the installation instructions. -The unit must be returned to the supplier for any claim under the terms of this warranty. -This will not affect
Statutory rights. Opal instructions display driver, follow the instructions matching adapter DOPS001, DOPS002, DOPS003, DOPS004 & DOPS005 trouble shooting guide (1) monitor does not display the information radio. Uni-link-check plug is fitted to the socket in the back of the radio. -Check plug 14pin installed adapter. -Check the connections, adapter car stereo system – consult your provider that provides. -Remote power radio connection test (step 5) – has been reset using the stereo button in the bezel (see User Guide) – consult your provider that provides. (2) the controls on the steering wheel does not turn on the radio. -Check the 3.5 mm jack plug is fitted into the 3.5 mm jack for radio. -Check the correct match of plug 14pin adapter. -Check for broken wiring or loose inside the harness provided. -Reset the stereo button with a recessed front panel (see User Guide) (3) the radio will not work after the installation. -Check that all connections are pushed fully into the terminal block on the back of the car stereo. -Verify that there are no broken pins on lead …
Download display driver Opal instructions, pdf barrel ADAPTER.
