Thursday, January 5, 2012
2010 Toyota Prius PHEV Conversion Kit User Manual
The Plug-in Hybrid Electric Vehicle Conversion Kit (PHEV) is a rechargeable battery set that is supplementary to a Hybrid vehicle battery. It supplies electricity stored in the supplementary battery, which is charged from an AC wall socket, which provides for 20 to 40 mile of electrically assisted driving per charge, sufficient for most normal daily commutes. It is safe, reliable, saves and is user and environmentally friendly.
Attention
1. Please read instructions before installation.
2. Never connect wires improperly.
3. New batteries should be re-charged to full and balanced before use.
4. Please check the batteries’ voltage and balance regularly for the first few times you drive the vehicle.
5. To extend battery life, equipment must be recharged, using the 110VAC household electricity powered charger provided, to full each time and the cells need to be fully balanced after charging.
6. The circuit breaker in the enclosure box is set to be switched off automatically if the current exceeds a pre-set limit
(100A). In the event this breaker switches off you will then need to manually switch it back on before use.
7. Please switch the equipment off immediately if a defect is found while driving.
8. Please do not disassemble the components if the equipment is working normally
What is Included in this Product
? 16 / 32 cells for 2KWH / 4KWH, Lithium-Ion batteries
? Battery balancers—one for every 8 cells, monitoring and balancing battery voltages to avoid over or under charges to individual cells. This can extend battery life by a factor of 3.
? 48V / 15A high power charger
? 3000W DC / DC Converter and Controller
? Fire extinguisher for protecting when the temperature is over 105?—First of all, please open the cover and take out the blue insulative inserter to let it work.
? Automatic DC circuit breaker—to disconnect high voltage equipment operation in the event of a high current fault.
? Easily installed enclosure, simple to use system.
