Thursday, February 2, 2012
Audi TT/VW GTI/Golf/Jetta rocketed performance chip upgrade installation instructions
This support is provided to you through the steps necessary to upgrade your vehicle with one of our performance chips. Note that APR is only a phone call away everyone should have any questions or concerns relating to all products of the APR.
Step 1: Park the car.
To insure the car is off and the key is out of ignition. Engage the parking brake. (Optional): remove the battery cable. Warning! Before disconnecting the battery, specify the correct encoding for the anti-theft radio.
Step 2: remove the wipers.
Remove wipers removal and installation of the ECM.
Allows you to remove the plastic cover from the odklopení screwdriver flat head. Remove the wiper singling out of 13 mm nut, wiper. After you remove the matrix must his odklopení he moved to arm from the mount. Be sure to note the location of odklopení for re-instillation.
Repeat this procedure for both sides.
Step 3: delete the Factory Weather-Stripping.
Step 4: Increase the plastic cover over the pollen filter.
Step 5: remove the plastic bracket, indicate the location of the cards
Step 6: Lever of the harness to the left and remove the left harness.
